8 LIT-PAL-CS Rev B
Inadequate Dry Cycle
Damaged Contacts from
Residual Moisture
The Internal Eects of
Improper Cleaning/Drying
The Impact of Improper Cleaning/Drying
1. Moisture induced issues are typically intermittent and can occur at any
time the system is in use.
2. Moisture and corrosion issues that result from inadequate cleaning/
reprocessing are NOT COVERED UNDER WARRANTY, resulting in
signicantly higher repair charges.
3. Moisture and corrosion issues WILL REOCCUR unless sta responsible
for cleaning/reprocessing are informed.
Results of Inadequate Cleaning and Sterilization
To Next Page
Loading...
