Microchip Technology RN4870 - Page 38

RN4870/71 Bluetooth
®
Low Energy Module User’s Guide
DS50002466A-page 38  2016 Microchip Technology Inc.
2.6.30 U,<1-8,Z>
Command U removes existing bonding. This command works in both central or periph-
eral GAP roles.
Command U expects one input parameter, a single digit indicating the index of the
bonding to be removed. The index of the bonding can be known by using command LB.
If the input parameter is letter “Z”, then all bonding information are cleared.
2.6.31
V
This command displays the firmware version.
2.6.32
X
Command X stops scan process started by command F. Command X does not expect
any parameter.
2.6.33
Y
Command Y stops advertisement started by command A. Command Y does not expect
any parameter.
2.6.34 Z
Command Z cancels connection attempt started by command C before a connection is
established. Command Z does not expect any parameter.
Example: U,1 // Remove the bond with index 1
Response: AOK
ERR
// Success
// Syntax error or invalid parameter
Example: V // Display firmware version
Response: <Version String>
Example: X // Stop scan
Response: AOK // Success
Example: Y // Stop advertisement
Response: AOK // Success
Example: Z // Cancel attempt to establish a connection
Response: AOK
ERR
// Success
// Already connected