Printer Modes Chapter 4
14 226/426 User’s Guide
Byte Mode
Responses
(ASCII Hex)
Text and Verbose Mode Responses Definition
0x01 >STOCK OUT< Out of Media
0x02 >STOCK OVERADVANCED<
Excess media past LPD
preventing a TOF operation.
0x03 >STOCK JAMMED< Media is jammed.
0x04 >INCORRECT STOCK<
Problem encountered trying to
realign media.
0x06 >OK<
ACK message used with the
^D726)1 command.
0x10 >CUTTER JAMMED< The cutter has jammed.
0x11 >CUTTER INOPERATIVE< The cutter is not detected
0x12
>CUTTER WATCHDOG STOPPED
CUTTER<
The software shut the cutter off
for safety issues.
0x13
>CUTTER WATCHDOG
WON’T RESET<
The software cannot reset the
cutter after a stopped condition.
0x15 >OPERATION FAILED<
The operation failed to execute
properly.
0x1C >MISSING LABEL<
Generated if more than one die-
cut label has been detected.
0x1D >INCOMPLETE FORM<
A complete script did not print on
a >STOCK OUT< condition.
0x20 >CATCH TRAY FULL<
The PMH has reached its
capacity.
0x21 >INPUT 1<
The Input 1 sensor has been
actuated.
0x22 >INPUT 2<
The Input 2 sensor has been
actuated.
0x30 >SCRIPT ERROR<
An error with the script has been
detected.
0x31 >INVALID PARAMETER<
The printer has detected an
invalid parameter.
0x32 >PARSER ERROR<
An error with the printer’s parser
has occurred.
0x40 >COMM ERROR<
A Communication error has
been detected.
0x51 >FLASH ERROR<
The flash memory has
encountered an error.
0x80 >RESTARTED<
The printer has been powered
on or the power has been reset.
To Next Page
Loading...