Chapter 4 Printer Modes
226/426 User’s Guide 15
Byte Mode
Responses
(ASCII Hex)
Text and Verbose Mode Responses Definition
0x81 >READY<
The printer is in ready to receive
data.
0x82 >BUSY< The printer is currently busy.
0x83 >PAUSED< The printer has been paused.
0x84 >PRINTING< The printer is currently printing.
0x85 >FEEDING<
The printer is currently feeding
media.
0x86 >LABEL/TAG PRESENT<
Media has been presented in a
dispense mode.
0x87 >STOCK ADVANCED< The media has been advanced.
0x8A >FLASH DEFRAGMENTING<
Flash file system is optimizing
memory.
0x8F >STOCK NOT LOADED<
The printer was powered up with
out media installed.
0x90 >RETRACTION DELAY<
The retraction has been
delayed.
0x91 >PRINT DELAY< The printing has been delayed.
0xB0 >FLASH MEMORY LOW<
The Flash memory file space is
95% full.
0xC0 >BUTTON 1 TAPPED<
The print button has been
pressed.
0xC1 >BUTTON 1 HELD< The print button has been held.
0xD0 >TEMPERATURE OUT OF RANGE<
The print head temperature is
out of operating range.
0xD1 >NONEXISTENT COMMAND<
The received command does not
exist.
0xD2 >INCOMPLETE COMMAND<
The received command is not
complete.
0xD3 >ZIP FILE ERROR<
The received Zipped file has an
error.
0xD4 >FILE CONVERSION ERROR<
The file was not converted
properly.
0xD5 >UNSUPPORTED FILE TYPE<
The received file is not
recognized.
0xD6 >FILE NOT FOUND<
The requested file does not exist
or cannot be found.
To Next Page
Loading...