Need help?Do you have a question about the MICRODOS MP2-HT mA and is the answer not in the manual?
General| Brand | MICRODOS |
|---|---|
| Model | MP2-HT mA |
| Category | Measuring Instruments |
| Language | English |
Overview of the pump's front panel interface and controls.
Details key operational features and capabilities of the dosing pump.
Lists factory default configurations for pump parameters.
Procedure to revert pump settings to factory defaults.
Explains the pump's standby mode and how to enter/exit it.
Details the function and operation of the prime button.
Describes how the optional level probe affects pump operation.
Guides through configuring pump settings like language and password.
Instructions for changing the pump's display language.
Configuration for the optional enable input for dosing consent.
Procedure for calibrating the pump's flow rate.
Method for determining flow rate based on actual dosing measurements.
Sets a delay before the pump starts dosing after power-on.
Restores factory default programming settings.
Configures the relay output for alarm signaling.
Details two types of manual dosing: constant and cyclical.
Explains dosing proportional to the input mA current.
To Next Page
