PARAMETERS:
mA Min: minimum mA current value
% Min: flowrate of the pump when the input exceeds mA Min
Dos.Min: allows to choose if, when the input mA current is less than the minimum mA current, the pump must dose [act]
at the % Min flowrate or it must not dose [dea]
mA Max: maximum mA current value
% Max: flowrate of the pump when the input current is equal to mA Max
Dos.Max: allows to choose if, when the input mA current is greater than mA Max, the pump must dose [act] at the
% Max flowrate or it must not dose [dea]
NB: WITH FACTORY
SETTINGS, WHEN IN THE
INPUT THERE IS A
CURRENT OF 4.0mA THE
PUMP DOES NOT DOSE;
WHEN IN THE INPUT
THERE IS A CURRENT OF
20mA THE PUMP DOSES
AT 100% OF THE
FLOWRATE.
To Next Page
Loading...
