Microgate SyncLink GT2 - Overview; Features; Specifications

To Next Page

To Previous Page

Overview

TheSyncLinkGT2andGT4SerialAdaptersareadd‐incardsforuseinsystemswithaPCIexpansionslot.

Thecardsprovidetwo(GT2)orfour(GT4)serialportsforusebythesystem.Avarietyofserialprotocols

andinterfacestandardsaresupported.Refertothesoftwaredocumentationincluded withthecardfor

detailsonusingthecardforaspecificapplication.

Features

• MaximumSpeeds

10Mbpssynchronous

1.8432Mbpsasynchronouswithstandardoscillator(14.7456MHz)

4Mbpsasynchronouswithcustomoscillator(32MHz)

• SDLC,HDLC,BISYNC,MONOSYNC,ASYNC,rawbit‐synchronousprotocols

• SelectablehardwareCRC:CRC‐16,CRC‐32,None

• DPLLClockRecovery(x8andx16sampling)

• ClockGeneration

• Configurabletransmitpreambleandidlepatterns

• Encoding:NRZ,NRZB,NRZ‐L,NRZI,NRZ‐M,NRZ‐S,FM0,FM1,Manchester,differentialbiphaselev el

• SelectableinterfaceforRS‐232,V.35,RS‐422/485,RS‐530,RS‐449,X.21

• Optionalterminationfordifferential inputs

• Optionalfailsafebiasingfordifferentialinputs

• Fullsetofcontrolandstatussignals(DTR,DSR,RTS,CTS,DCD,RI,LL,RL)



Specifications

• MicroGateFPGAserialcontroller(2or4ports)

• PCI3.0(compatiblewith5V,3.3V,andPCI‐Xslots)

• BusMasterDMAdatatransfer

• OperatingTemperature:0Cto60Cstandard,‐40Cto+85Coptional

• StorageTemperature:‐55Cto+125C

• Environmental:humidity0to95%non‐condensing;alt.‐200to+20,000ft

• Mechanical:StandardPCIshortcard;length6.875",heigh t4.2",Weight5.5Oz

• Powerusage:300mA5V,80mA+12V,80mA‐12V

• Regulatory:FCCClassB,CE,ANSIC63.4ClassB,VCCIClassB,EN55022ClassB,EN55024,RoHS

• Connectors:DB‐25(male)

• CableOptions:DB‐25(female)toDB‐25(male);DB‐25(female)to34‐pinV.35(male);DB‐25

(female)to37‐pinRS‐449(male);DB‐25(female)to15‐pinX.21(male)

