Microlife BP AG1-20 - Device Care, Maintenance, and Recalibration; Product Guarantee Information

6. Care and maintenance, recalibration
With proper care and maintenance, this blood pressure measuring device will provide years of
satisfactoryservice.Followthegeneralrulesbelow:
•Donotdrop.
•Neverinflatebeyond300mmHg.
•Donotexposethedevicetoeitherextremetemparatures,humidity,ordirectsunlight.
•Nevercontactthecufffabricwithasharpinstrument,sincethiscouldcausedamage.
•Alwaysdeflatecuffcompletelybeforestorage.
•Donotdismantlemanometerunderanycircumstance.
•Storethewholedeviceinstoragebagprovided,tokeepallthepartsclean.
•Storagetemperaturecondition:20- +70 °C at a relative air humidity of 85 % (non-condensing).
•Wipe off the manometer and bulb with a damp cloth. Sterilization is not necessary, since the parts
of manometer should not come into direct contact with the patient‘s body during measurement.
•Removethebladderfirst,andwipethecloser,bladderandtubeswithadampcloth.Thecuffcan
be washed with soap and cold water. But do rinse the cuff with clear water and keep it air dry.
Periodical recalibration
Sensitive measuring devices must from time to time be checked for accuracy. We therefore
recommend a periodical inspection of the static pressure display every 2 years.
Your specialist dealer would be pleased to provide more extensive information about this.
7. Guarantee
This blood pressure monitor is guaranteed for 2 years from date of purchase. This guarantee
includes the instrument and the cuff. The guarantee does not apply to damage caused by
improper handling, accidents, not following the operating instructions or alterations made to the
instrument by third parties.
The guarantee is only valid upon presentation of the guarantee card filled out by the dealer.
Nameandcompanyaddressoftheresponsibledealer:
10