Micromax HM 340 E - Page 14

Rotary Microtome HM 340 E
MICROM International GmbH
Robert-Bosch-Str. 49
D- 69190 Walldorf 386 200 - English
1 - 2 TECHNICAL SPECIFICATIONS HM 340 E
Microtome: Section thickness range ...................................................... 0,5 - 100 µm
Resolution: ........................................................... 0,5 µm for 0,5 - 2 µm
.................................................................................. 1 µm for 2 - 10 µm
................................................................................ 2 µm for 10 - 20 µm
................................................................................ 5 µm for 20 - 30 µm
............................................................................... 10 µm for 30 - 40 µm
............................................................................. 20 µm for 40 - 100 µm
Trimming thickness range ....................................................... 5 - 500 µm
Resolution .................................................................. 5 µm for 5 - 10 µm
............................................................................. 10 µm for 10 - 100 µm
........................................................................... 20 µm for 100 - 200 µm
........................................................................... 50 µm for 200 - 500 µm
Specimen retraction during return travel .................................... 40 µm
Horizontal feed range .......................................................... max. 28 mm
Vertical specimen stroke ...................................................... max. 64 mm
Section counter: Five-digit LC display with reset
Sum of section
thicknesses: Five-digit LC display with reset
Remaining travel to front
end position: Five-digit LC display
Specimen size: Standard ................................................................................55 x 50 mm
Specimen orientation: x - and y - axes: ................................................................... universal 8°
z - axis: .................................................................................. up to 360°
Cutting drive: ............................................................... manual by means of handwheel
Coarse feed: ...................................................... motorized, graduated and continuous
Speed for
coarse feed: ............................................................................. 400, 800 or 1200 µm/s
Storage
temperature range: ................................................................................... -20°C up to +50°C
Operating conditions: ................................ +5°C to +40°C (at a max. rel. air moisture of 60%)
................................................................... altitude up to 2000 m M.S.L.
................................................................................... for indoor use only
Power requirements: .................................................... 220...230 V 0.15 A +/-10% 50...60 Hz
............................................................ 240 V 0.15 A +/-10% 50...60 Hz
.......................................................... 100 V 300 mA +/-10% 50...60 Hz
.......................................................... 115 V 300 mA +/-10% 50...60 Hz
Pollution degree: ............................................................................................................... 2
Overvoltage category: ............................................................................................................... II
Dimensions: ......................................................... 410x520x280 mm (wide/deep/high)
Weight: ......................................................................................................... 28 kg