Rotary Microtome HM 340 E
MICROM International GmbH
Robert-Bosch-Str. 49
D- 69190 Walldorf 386 200 - English
Intended Use
Table of Contents
Safety Precautions
Part 1 Introduction
1-1 Description of the Rotary Microtome HM 340 E
1-2 Technical specifications HM 340 E
Part 2 Operating Instructions
2-1 Setting up the microtome
2-2 Initial turn-on
2-3 Cutting movement and retraction
2-4 Locking and unlocking the handwheel
2-5 Setting section thickness and trimming thickness
2-6 Specimen feed
2-6-1 Coarse feed and speed for coarse feed
2-6-2 Trimming and first cuts
2-6-3 Fine feed
2-7 Indication of cutting processes
2-7-1 Section counter
2-7-2 Sum of section thicknesses
2-7-3 Remaining travel to front end position
2-8 Turning off the function <retraction>
2-9 Selecting the indicated language
2-10 Specimen clamping
2-10-1 Universal cassette clamp
2-10-2 Standard specimen clamp
2-10-3 Insert for round specimens, V-insert and V-distance piece
2-10-4 Foil clamp
2-10-5 Segment arc and universal specimen holder
2-11 Adapters for specimen clamping
2-11-1 Adapter, non-orienting
2-11-2 Adapter, orienting, specimen orientation
2-11-3 Changing and/or clamping specimen clamps
2-11-4 Readjusting specimen clamps
To Next Page
Loading...