Micron IMTB - System Settings; Language Setting; Chime Time and Volume; Ring Type Configuration

In standby status ,press button to enter system setting menu.
11、System setting
Page 13
No. Setting items Options Notes
1 LANGUAGE Default English(Russian optional)
2 CHIME TIME Default 30seconds。(10～60 seconds adjustable)
3 CHIME VOLUME Default 07, 01～10 adjustable.
4 RING TYPE
Door1 ring type 01 by default, 00-11 optionals
Door2 ring type 02 by default , 00-11 optionals
Intercom ring type 03 by default , 00-11 optionals
5 DO NOT DISTURB
Off by default, at the ringing, intercom between
monitors, broadcast status, the LED indicator will
flicker when turn on “DO NOT DISTURB” function.
6
CAN BE
MONITORED
Off by default, it can be monitored by other indoor
intercoms in the system when turn on this function.
7 RINGTONE REPEAT If disabled, the monitor shall chime only once.
8 DEVICE ADDRESS
Room1/2/3/
4
Master monitor must be set as ROOM
1, and the option will be yellow if two
monitors set the same address.
9 PORT4 STATE None / CCTV1 / CCTV1&2
10 MONITOR UNLOCK Press button to unlock
11 RESTORE DEFAULT Restore the system to default settings.