Medical panic code (2 digits)
Arming failure (2 digits)
User code changed (2 digits)
User initiated test code (2 digits)
Line fault code (2 digits)
Line restore code (2 digits)
Comms fail code (2 digits)
AC Power failure code (2 digits)
AC Power restore code (2 digits)
Battery test fail code (2 digits)
Battery restore code (2 digits)
Test signal code (2 digits)
Auxiliary power overload (2 digits)
Siren output fault (2 digits)
Panel program accessed or altered (2 digits)
Clock setting changed code (2 digits)
The following locations are single digit entries. The user ID number or zone ID is
automatically sent as the second digit. Note: Press „star‟ + N for 10,11,12,13,14,15.
Zone bypass code (1 digit)
Zone restore code (1 digit)
Zone transmitter low battery (1 digit)
User close code (1 digit)
User first to open code (1 digit)
User last to close code (1 digit)
User pendant battery low code (1 digit)
User duress code (1 digit)
Days between tests (test interval)
erased = 1 day, 1-15 = 1-15 days
Custom key 1 definition (LCD model keypads only)
Erased - No function
1 - Toggle chime area A
2 - Toggle chime area B
3 - Instant night arm area A
4 - Instant night arm area B
5 - Delay night arm area A
6 - Delay night arm area B
7 - Quick-arm area A
8 - Quick-arm area B
9 - Strike
0 – Answer
11- Reserved
12 - Medical panic (enter as „star‟ + 2)
13 - Fire panic (enter as „star‟ + 3)
14 - Keypad panic (enter as „star‟ + 4)
15 - Reserved
Auto-arming pre-alert (minutes)
Area A exit delay (1 digit)
Erased: instant, 1-15: 10 to 150 seconds
Default 6, 60 seconds
(multiply by 10)
Area B exit delay (1 digit)
As above
Area A entry delay (1 digit)
As above
To Next Page
Loading...
Need help?
General
