Need help?Do you have a question about the Micron Scorpion Z4120C and is the answer not in the manual?
General| Category | Network Router |
|---|---|
| Manufacturer | Micron |
| Model | Scorpion Z4120C |
| USB Port | 1 x USB 3.0 |
| Processor | Dual-core 1.2 GHz |
| Frequency Band | 2.4 GHz, 5 GHz |
| Ports | 4 x Gigabit Ethernet |
| Security | WPA, WPA2 |
| Memory | 256 MB RAM, 128 MB Flash |
| Wireless Standards | 802.11a/b/g/n/ac |
Describes the functionality and connectivity of the LED keypad.
Details the Icon LCD Keypad and its programmable custom keys.
Instructions for quickly arming Area A or Area B of the panel.
How to use the keypad command to reset smoke detectors.
Explanation of enabling and using the chime function for zones.
Procedure to recall and view past alarm events on the keypad.
How to display current system status events via keypad LEDs.
Details on arming the system in Night or Instant modes.
Command to force the panel to answer an incoming call immediately.
Instructions for initiating a call to a remote computer.
How to activate the two-key panic alarm function.
Procedure for activating the Fire Panic alarm.
How to activate the Medical Panic alarm function.
Basic procedure for arming and disarming the security system.
How to send a duress code during the disarming process.
Method to arm the panel while excluding specific zones.
How to access programming mode if the master code is lost.
Details on the operation of 24-hour zones and swinger shutdown.
Explains the various functions assignable to user codes.
How the panel monitors for telephone line faults.
Configuration for sending periodic test signals to the monitoring station.
Explanation of the auto-arming feature and its pre-alert timing.
Details on using the high-power siren output.
Configuration of entry delays for night arming and alternate paths.
Procedure to set the panel's internal clock time.
How to set the desired auto-arming time.
Programming 'follow me' phone numbers for alerts.
Using keypad LEDs to monitor dialer communication progress.
Guidelines for entering and managing programming settings.
How to input data into programming locations.
Method to erase data from a programming location.
Configuring the panel's default dialing mode (DTMF or Decadic).
Overview of programming locations and their contents.
Details on programming user codes and their options.
Configuration of Contact-ID codes for event reporting.
Settings for non-Contact-ID reporting formats.
Programming various delay and timer settings for system functions.
Configuration of communication parameters like rings and call attempts.
Settings to define zone behaviors and sensitivities.
General system configurations and miscellaneous settings.
Customizing options and reports for individual user codes.
Setting up the 'Follow Me' feature for remote notifications.
Table showing approximate current draw of system accessories.
Illustrates the wiring connections for siren and fire systems.
Detailed system parameters including power and connectivity.
Important disclaimer regarding Telecom connection and product compatibility.
Step-by-step guide for connecting the system to the telephone network.
Instructions for safely connecting the system to mains earth.
To Next Page
