36
4.2 Installation and Setup
Please follow the procedures described below for installation and
construct a peer-to-peer connection (PTPP) between Windows
NT/2000/2003 Server and Print Server.
Step1.
If this is your first time installing print server, please install the
administrator software on Windows NT/2000/2003 server first. Refer to
section 3.2 for installation instructions.
If your network has already installed a working print server and your
Windows NT/2000/2003 server has not yet installed the PTPP driver,
please install the client software. Refer to section 3.4 and 3.5 for
installation instructions.
Step2.
Please add/configure the Peer-to-Peer Printing of the Windows
NT/2000/2003 network printer and verify that you can print from Windows
NT/2000/2003 to the print server by the installed PTPP driver.
Step3.
Share the above server’s printer to the network by performing the
standard Windows printer sharing process.
To Next Page
Loading...