59
7.11 System Configuration
Double Click “System” icon and the System configuration window will pop-
up.
In the System configuration page, you can select to enable/disable each
printing or management protocol, upgrade the new firmware for this print
server, and load factory defaults to the print server.
Upgrade Firmware: You can use this “Upgrade Firmware” tool to update
the newest firmware of the print server. Click “
” button and select the
correct firmware in your PC. After selecting the firmware file, click the
“Upgrade” button to finish the firmware update process.
Load Default: If you want to reset the Print Server to default factory
settings, please click “Load Default”.
To Next Page
Loading...