EasyManua.ls Logo

Microsemi SyncSystem 4380A - Page 62

Microsemi SyncSystem 4380A
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DOC 4380A
4380A O & M Manual
54
098-00723-000 Jul 2017 Revision 4.0 SyncSystem 4380A O&M Manual
[active] false
[occurrences] 0
L. The [ref_unlocked] fields are reporting the clock status and system performance information. The
reference should be locked ([ref_unlocked] [active] = false). The syscfg active block should be
false. TCXO should also not be reporting any errors.
[ref_unlocked]
[active] false
[occurrences] 0
[syscfg]
[active] false
[occurrences] 0
[tcxo_failure]
[active] false
[occurrences] 0
M. Once the system obtains a sufficient amount of clock data the kas2 values will be available.
[kas2]
[aging] 1.034079545296274e-21
[coldstart_time] 2015-08-05T14:34:30Z
[deviation_scalar] 1.000000000000000e+00
[frequency] -1.498015356088144e-13
[phase] 1.390605625690108e-09
[ptd] 8.827366060000000e-10
[steer] -2.226820215582848e-10
[warmstart_time] N/A
N. The leap seconds block should reflect the current # of leap seconds -10. The effective time should
reflect the # of seconds since 1970 the current leap second occurred. The future leap second value
should equal the current value unless there is a leap second pending.
[leapseconds]
[current] 35
[effectivity_time] 2014-01-01-00:00:00
[future] 35
O. The system should show that NTP is locked (true) and that the system is using the internal clock.
[ntp]
[locked] true
[source] internal refclock
P. The system should report the outputs are enabled
[outputs] enabled
Q. The system will also show if the external & internal clocks have been detected and the system will
provide the internal operating temperature. If an external 10MHz signal is not being provided, the
reference:external field will display signal missing. The ocxo_freq_control should also be
between -98 and 98.
Reference_type = hp5071A
[frequency]
[external]
[communications] N/A
[locked] true
[signal] present
[internal]
[locked] true
[timescale]
[clocks]
[Cesium1]
[1_pps_present_slot_4_port_1] true
[communications] N/A
[id] 1365
[Cesium2]
[1_pps_present_slot_4_port_2] true
[communications] N/A
[id] 1559
[hp5071]

Table of Contents

Other manuals for Microsemi SyncSystem 4380A