Create a file under a new name.
Save currently edited file.
Load an existed file to run or edit.
Select calibrate mode / path.
Perform open circuit trimming.
Perform short circuit trimming.
Returns the result of the calibration performed.
Trigger a measurement in the current mode.
Set the external trigger delay time.
Trigger delay time query.
Select local trigger condition.
Query the local trigger condition.
Enable repetitive measurements when unit is returned to local
control.
Query the trigger status.
Query the currently selected operating mode.
Returns the display as a windows compatible bitmap.
Set the buzzer condition.
To Next Page
Loading...
