What to do if MicroVision Projector won’t turn on and the Blue LED stays on?
If your MicroVision Projector won’t turn off or on, and the Blue LED remains on, the system might be frozen. To resolve this, press and hold the Power button for 20 seconds. If that doesn't work, remove the battery, then re-insert it and turn the projector on.
How to fix a MicroVision SHOWWX+ that does not turn on?
If your MicroVision Projector does not turn on, ensure that the battery is correctly inserted and fully charged.
What does it mean when the red LED is blinking on my MicroVision Projector?
If the red LED is blinking on your MicroVision Projector, it indicates that the projector is out of its operating range or there's a temporary problem. Turn the projector off, remove the battery, re-insert it, and power it back on.
Why does my MicroVision SHOWWX+ randomly turn off?
If your MicroVision Projector randomly turns off but the Blue LED stays on, it might be operating outside of its recommended temperature range. Ensure the projector is well-ventilated and within the correct operating temperature. Turn it off for 5 minutes before restarting.
What to do if MicroVision SHOWWX+ Projector image is fuzzy?
If the image on your MicroVision Projector looks a little fuzzy, it might be due to debris on the window or image misalignment. Clean the window or adjust the image alignment.
Why is the green LED blinking on my MicroVision SHOWWX+ Projector while charging?
If the green LED keeps blinking while charging your MicroVision Projector, the battery is not correctly inserted. Make sure the battery is correctly inserted into the SHOWWX+.
Why doesn’t my MicroVision SHOWWX+ battery charge?
If your MicroVision Projector battery doesn’t charge, it might not be capable of holding a charge. Install a new battery.
Why MicroVision SHOWWX+ doesn't work with my cell phone?
If your MicroVision Projector doesn’t work with your cell phone, it may be because not all cell phones have the TV-out feature. Refer to your cell phone manufacturer’s user guide to see if TV-out is available and how to configure it.
Warns against staring into the laser beam and disassembling the projector.
Advises against modifying the product or using damaged adapters.
Lists precautions related to liquid exposure, batteries, and extreme temperatures.
Covers safe handling of batteries and avoiding vehicle distraction.
Alerts users to potential seizure risks from flashing lights and provides precautions.
Details compliance with laser safety standards IEC 60825-1 and US FDA regulations.
Provides technical details on laser color, type, output, and wavelength.
States compliance with FCC rules for digital devices and interference.
Provides step-by-step instructions for installing the projector's battery.
Details the process for charging the projector's battery using the wall charger.
Explains how to turn the projector on and off, including LED indicator meanings.
Guides on connecting the projector to Apple devices using the specific cable.
General| Brand | MicroVision |
|---|---|
| Model | SHOWWX+ |
| Category | Projector |
| Language | English |
To Next Page