Midas M32

181
8
18
We’ve added 16 new FX “Plug-Ins” to the M32,
giving you access to a total of 50+ e ects that
would otherwise cost tens of thousands of dollars
inhardware.
This new generation of high-end FX “Plug-Ins” is
based on True Physical Modelling of classic audio
hardware. We essentially “rebuilt” classic analog
gear in the digital domain and included models of
legendary processors such as Urei’s 1176*, Teletronix
LA-2A* and Fairchild 670* compressors as well as
the legendary Pultec* EQP- 1a and EQ5 equalizers
etc. We also added a cutting-edge 5 band multi-
bandcompressor.
16 Breathtaking FX “Plug-Ins”
Basedon True Physical Modeling
Last but not least, the M32 can now run 4 studio-
quality stereo reverbs together with 8 channels
of 31 band graphic EQ. This allows you to replace
your old outboard gear with a fully recallable
onboardsolution.
Gain Splitting and Remote Control
for FOH and Monitoring
A new Gain Split mode separates channel gain (trim)
from the head amp gain, allowing both the FOH
and/or the monitor engineer to adjust local trim
digitally – and independently of the preamp gain.
Additionally, the new Head Ampli er (HA) Gain
Remote option allows console gains to be remotely
controlled by an external console, such as when
using the M32 as a stagebox.
Elements of Flow