Midas M32

191919
The M32’s highly  exible routing allows output
signals and XLR outputs are to be treated separately,
and signals from AES50 sources or expansion cards
to be routed directly to the M32’s analog outputs.
You can use the outputs from an M32 for directly
routing back PA or monitoring signals from a main
or FOH console. Output tap points can be set as
pre- or post-mute for greater usability with your
P16 personal monitoring mixers. This is very useful
in situations where you don’t want mute groups to
interrupt your signal  ow.
More Routing and
Processing Flexibility
Introducing the Cue List, an innovative way to
automate the loading of scenes and new “Snippets”
at di erent points during a show. Each of the 500
Cue entries can load any of the 100 Scenes or
Snippets separately or at the same time. This gives
you an amazing total of 500 Cues x 100 Scenes x
100Snippets!
For example, store your favourite EQ settings for
drums on channels 1-8 as a Snippet, recallable in an
instant as its own preset, completely independent of
the console’s overall scene. It’s like taking a snapshot
of a parameter on an input, return, FX slot, bus,
Matrix, Main or DCA group – and saving it for quick
access whenever you need it.
Mighty New Tools for Scene and
ShowManagement
The Live! Award 1994