Setting up the effects rack 45
PRO6 Control Centre
Quick Reference Guide
3 Band Compressor — is a
minimum phase shift (analogue
style) implementation that
guarantees coherent band summing,
even at the most extreme crossover
point settings. Each band provides
full control of its compressor’s
action, with partially adaptive time constants ensuring the most natural results from
even the most variable sources.
>> To add an effect to the effects rack
1 At the GUI, choose homeRack
UnitsEffects. Alternatively, press the
effects/graphics screen access button in
the primary navigation zone.
2 Click within your chosen rack position. This
will be the position of the new effect.
3 In the new effect’s window, click CHANGE
DEVICE TYPE.
4 In the Change Device Type window, click
your chosen device type. For example,
“DN780”.
5 Click OK.
6 Change the parameters of the new effect
device, as necessary. For example, adjust
control knobs, press buttons etc. You can
even change the effect’s name by editing
its name field (shown above).
7 Click OK to exit. The new effect will appear
in the effects rack.
8 You can now patch the new effect, which
will be on the Effects tabs of both the
From and To sections of the Patching
screen. For information on how to patch,
see Chapter 5 "Patching" on page 23.
2
3
4
7
5
Effect name field
To Next Page
Loading...
