Locking function
The accessories can be pulled out approximately halfway until they lock in
place. The locking function prevents the accessories from tilting when they
are pulled out. The accessories must be inserted into the cavity correctly
for the tilt protection to work properly. When inserting the wire rack,
ensure the wire rack is onto the right facing direction like the picture .
3
When inserting the backing tray, ensure the backing tray is onto the right
facing direction like the picture .
1 4
1 3
4
Optional accessories
You can buy optional accessories from the after-sales service, from
specialist retailers or online. Please see your sales brochures for more details.
When purchasing, please always quote the exact order number of the
optional accessory.
2
1
5
4
3
2
1
▲
▲
To Next Page
Loading...
