Replacing the lamp on the corner of the cavity
If the cavity lamp fails, it must be replaced. Heat-resistant, 25 watt,
230 V halogen lamps are available from the after-sales service or
specialist retailers.
When handling the halogen lamp, use a dry cloth. This will increase
the service life of the lamp.
WARNING
Risk of electric shock!
When replacing the lamp, the lamp socket contacts are live.
Before replacing the lamp, unplug the appliance from the mains or
switch off the circuit breaker in the fuse box.
Risk of burns!
The appliance becomes very hot. Never touch the interior surfaces
of the appliance or the heating elements. Always allow the appliance
to cool down. Keep children at a safe distance.
1. Place a towel in the cold cavity to prevent damage.
2. Turn the glass cover anti-clockwise to remove it.
3. Pull out the lamp – do not turn it.Screw the glass cover back in.
4. Remove the towel and switch on the circuit breaker to see if
lamp switches on.
Insert the new lamp, making sure that the pins are in the correct
position. Push the lamp in firmly.
Glass cover
If the glass cover of the halogen lamp is damaged, it must be replaced.
You can obtain a new glass cover from the after-sales service. Please
specify the E number and FD number of your appliance.
▲
▲
▲
▲
To Next Page
Loading...
