Midea COMBI Series - Page 24

Service Manual_2018-V2.0
24
Light of the freezing
Light of the freezer room is located upper freezer room
(inner display)
1）Remove the lamp cover
2）Remove the LED
3) The reverse process can complete installation.
Light switch
There is a light switch on the side wall of the refrigerating
chamber.
1）Loosen the hook with small normal screwdriver and
pull out the switch until the wire connector reveals.
The switch is locate in the top hinge cover of cabinet
1）Remove the screw of hinge cover
2）Remove the hinge cover
3）Remove the switch
4）The reverse operation for assembly