Midea COMBI Series - Display control board (None)

Service Manual_2018-V2.0
34
Piping system in the compressor case
❶ Compressor ❷ Suction connection Pipe
❸ Drier ❹ Capillary Tube
❺ Anti-condensation pipe ❻ Right condenser
❼ Left condenser ❽ Anti-condensation pipe
❾ Exhaust evaporation pipe
Drain tray
1）Disengage the drain tray buckle out of the compressor
bottom plate installation hole.
2）Replace the drain tray, the reverse process can
complete installation.
8.8 Display control board (None)