Service Manual_2018-V2.0
30
8.7 Compressor case
1）Remove by cross screwdriver the screws fixing back
cover plate of compressor chamber anticlockwise
2）Take the back cover plate of compressor chamber
upward.
Compressor and the cooling system pipe
1）Cut off the power, remove the goods in the refrigerator,
with the tape to make the door fixed firmly and prevent
the door dropping when the refrigerator dumping.
2）Slowly tilt the refrigerator forward, relying on the wall or
a solid enough object, leaving space to facilitate the
operation. For safety, it should be carried by someone to
prevent its falling.
3）Cut off the compressor pipeline.-❶Cut off the process
pipeline.-❷Cut off the low-pressure muffler.-❸Cut off
the high-pressure exhaust pipe.
To Next Page
Loading...
Need help?
General
