Service Manual_2018-V2.0
25
the door switch of freezer room is placed in the
mounting box on the bottom of refrigerator room door
1）Use slotted screwdriver to dismantle the cover of door
switch;
2） Disconnect the wiring connector, and dismantle the
door switch
3）The reverse operation for assembly
8.4 Air duct components refrigerating chamber and fan motor
Air duct components in freezing chamber
1） The refrigerator air duct components is located on
the back of the refrigerating chamber. use slotted
screwdriver to dismanlte the decorative
cover,
2） then use cross screwdriver to remove the fittin screw
of air duct cover
To Next Page
Loading...
