Midea CV10DPWBL0RC0 - 4 Malfunctions Codes and Explanations

4 MALFUNCTIONS CODES AND EXPLANATIONS
12
DISPLAY CHECK
Washing machine won’t work
• Is the water tap opened?
• Is the washer plugged in?
• Is the power cut off?
• Is there enough water?
E1
--Water is not supplied
• Is the water tap opened?
• Is the water cut off?
• Is the water supply hose or hose
connection clogged?
• Is the water tap frozen?
If the water supply is not finished in
30mins after the water supply has
started, the buzzer rings and “E1” is
displayed on the indicator.
E2
--Alarm for Lid open
• Close the Lid
• Check the safety switch
E3
--Alarm for imbalance
• Is the laundry spread out evenly in the washer?
• In the washer set on a sturdy flat
surface?
• Check the safety switch
E4
--Alarm for not draining
• Is the drain hose down?
• Is the drain hose clogged?
• Check the drain valve
• Check the water level sensor
If the water dose not drain in 6minutes,
a buzzer will sound, and
the remaining time indicator will show