Page 24
Operating
Instructions
(With Remote)
How to Use the Buttons
AUTO OPERATION
Ensure the unit is plugged in and power is available.
1. Press the ON/OFF button to start the air
conditioner.
2. Press the MODE button to select Auto.
3. Press the TEMP UP ( )/DOWN ( ) button to
set the desired temperature.
COOLING / FAN OPERATION
Ensure the unit is plugged in and power is available.
1. Press the ON/OFF button to start the air
conditioner.
2. Press the MODE button to select Cool or Fan
mode.
3. Press the TEMP UP (
)/DOWN ( ) button to
set the desired temperature.
4. Press the FAN UP (
)/DOWN ( ) button to
select the fan speed.
4
4
NOTE
Temperature cannot be changed in Fan mode.
NOTE
1. In the Auto mode, the air conditioner can
logically choose the mode (Cooling or Fan)
and by sensing the difference between the
actual ambient room temperature and the set
temperature on the remote controller.
2. In Auto mode, you cannot adjust the fan speed.
As it is controlled automatically.
3. If the Auto mode is not comfortable for you,
the desired mode can be selected manually.
1
3
3
2
1
3
3
2
To Next Page
Loading...
Need help?
General
