Page 25
Operating
Instructions
(With Remote)
DEHUMIDIFYING OPERATION
Ensure the unit is plugged in and power is available.
1. Press the ON/OFF button to start the air
conditioner.
2. Press the MODE button to select Dry.
3. Press the TEMP UP (
)/DOWN ( ) button to
set the desired temperature.
TIMER OPERATION
Press the TIMER button to initiate the Auto-start
and Auto-stop setting program of the unit.
To set the Auto-start/stop time.
1. Press the TIMER button, when the TIMER ON
indicator is displayed on the LED window of
the air conditioner, it indicates the Auto Start
setting program is initiated. When the TIMER
OFF indicator is displayed on the LED window
of the air conditioner, it indicates the Auto
Stop setting program is initiated.
2. Press or hold the TEMP UP ( )/DOWN ( )
to change the Auto time. The control will count
down the time remaining until start/stop.
3. The selected time will register in 5 seconds and
the air conditioner will automatically revert back
to display the previous temperature setting.
4. Turning the unit ON or OFF at any time will
cancel the Auto Start/stop function.
NOTE
NOTE
In the Dehumidifying mode, you cannot adjust
the fan speed, as it is controlled automatically.
To cancel the TIMER setting, push the TIMER
button and press or hold the TEMP UP (
)/
DOWN ( ) until 0 hour is displayed on the LCD
window of the air conditioner.
1
3
3
2
1
2
2
To Next Page
Loading...
Need help?
General
