Midea G01 - Undo the Detergent Box; Undo the Inlet Valve

P.39
Operation step Picture
10 the detergentUndo
box
① the top coverUndo
and the control panel
().methods as followed
② Release the hose clamp
and pull out the inlet hose.
③ Release the hose clamp
and pull out the detergent
box hose, and then take
out the detergent box.
11 the inlet valveUndo
① Remove the top cover
().methods as followed
② Undo 2 screws between
cabinet and inlet valve.
5.UNPACKING WAYS OF MAIN PARTS
9 Undo the PCB panel
Undo the top cover
and control panel(methods
as followed).