EasyManua.ls Logo

Midea JL1850S-RO

Midea JL1850S-RO
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
15. Machine Installation
1-2. Loosen the screw of the left or right bottom angle just as the picture shown.
3. Use the screw to fix the bracket on the left or right bottom angle of the water
purifier.
4. Make a hole on the floor's or the desk's surface where the water dispenser will be
installed.
5. Fix the bracket on the floor by screw tightly.
6. Tighten the screw.
Inspection and confirmation
1. Confirm there is no water leakage from the branch faucet connected to pure water,
the tube /filter inside the main body, and the connecting part.
2. Make sure that the drain tube does not move due to the force of drainage.
3. Confirm that sound and vibration during pump operation resonate on the
installation surface and abnormal sound does not appear.

Other manuals for Midea JL1850S-RO

Related product manuals