EasyManua.ls Logo

Midea mcd-24hrdn1 - Page 200

Midea mcd-24hrdn1
243 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Electrical Control Function
190 Electrical Control System
The timer function will not change the AC current operation mode. Suppose AC is off now, it will not start up
firstly after setting the “timer off” function. And when reaching the setting time, the timer LED will be off and
the AC running mode has not been changed.
1.3.6.7 The setting time is relative time.
1.3.7 Economy function
For 12k models:
1.3.7.1 The sleep function is available in cooling, heating or auto mode.
1.3.7.2. Operation process in sleep mode is as follow:
When cooling, the setting temperature rises 1 (be lower than 30) every one hour, 2 hours later the
setting temperature stops rising and the indoor fan is fixed at low speed.
When heating, the setting temperature decreases 1 (be higher than 17) every one hour, 2 hours later
the setting temperature stops rising and indoor fan is fixed at low speed. (Anti-cold wind function has the
priority).
1.3.7.3 Operation time in sleep mode is 7 hours. After 7 hours the AC quits this mode and turns off
1.3.7.4 Shutdown, change the mode or speed setting will cancel the economic operation.
1.3.7.5 When user uses timer off function in sleep mode (or sleep function in timer off mode), if the timing is
less than 7 hours, sleep function will be cancelled when reaching the setting time. If the timing is more than 7
hours, the machine will not stop until reaches the setting time in sleep mode.
1.3.7.6 When user uses timer on function in sleep modes, sleep mode will not pause until reaches
the setting time. (Only for Ceiling and floor 12k&A5 12k)
For console 18k & GA floor standing:
1.3.7.1 The sleep function is available in cooling, heating or auto mode.
1.3.7.2. Operation process in sleep mode is as follow:
When cooling, the setting temperature rises 1 (be lower than 30) every one hour, 2 hours later the
setting temperature stops rising and the indoor fan is fixed at auto speed.
When heating, the setting temperature decreases 1 (be higher than 17) every one hour, 2 hours later
the setting temperature stops rising and indoor fan is fixed at auto speed. (Anti-cold wind function has the
priority).
1.3.7.3 Operation time in sleep mode is 7 hours. After 7 hours the AC quits this mode and turns off
1.3.7.4 Shutdown, change the mode or speed setting will cancel the economic operation.
1.3.7.5 When user uses timer off function in sleep mode (or sleep function in timer off mode), if the timing is
less than 7 hours, sleep function will be cancelled when reaching the setting time. If the timing is more than 7
hours, the machine will not stop until reaches the setting time in sleep mode.
For other models:
1.3.7.1 The sleep function is available in cooling, heating or auto mode.
1.3.7.2. Operation process in sleep mode is as follow:

Table of Contents

Related product manuals