Midea MDDP50 - Page 30

7
The Dehumidifier supports the following function: Power, Fan, Continuous,
Auto Dehumidification, Dryer, Anti-mould and Pure.
1. Power
Click on/off icon to turn on/off humidifier.
2. Fan mode
Click Fan icon to activate high ,med(on some models),low fan speed.
3. Continuous mode
Click Continuous icon to activate. Press again to deactivate.
4. Auto dehumidification mode(on some models)
Click Auto dehumidification icon to activate.Press again to deactivate.
5. Dryer mode(on some models)
Click Dryer icon to activate.Press again to deactivate.
6. Anti-mould mode(on some models)
Click Anti-mould icon to activate.Press again to deactivate.
7. Pure mode(on some models)
Click Pure icon to activate.Press again to deactivate.
8. Humidity control.
The range of humidity is 35%RH-85%RH. User can add humitidy by clockwise
adjusting the white pointer. Similarily, user can minus humidity by anticlockwise
adjusting the white pointer. The yellow pointer means current indoor humidity.
NOTE:Not all the function of the APP is available on dehumidifier. For example:
ION, Pump, Pure function, please check the user manual to find more information.
Thus, user can control dehumidifier on/off status, operation mode, target humidity,
fan speed and so on.