18
OPERATION
Programme selector
1.When the LED display screen brightens up, rotate the programme knob to select the
desired programme.
2.Select the【Delay】,【Time】,【Intensity】, or【Anti-Crease】functions
for additional options.
3.Press the【Start/Pause】button.
4.Press the【On/Off】button after the programme has comlpeted.
Programme start
Programme end
The drum will rotate after the programme starts. The remaining programme time will
be displayed.
Programmes
1.The drum will stop rotating after the programme ends. The display will show "0:00".
The dryer will start【Anti-Crease】function if the user doesn't remove the load.
(Refer to page 16).
Please press【On/Off】button after unloading the tumble dryer to cut off power
and pull out the plug.
2.Deal with the problems according to “Trouble Shooting” section, if there is an
unexpected stop during the drying procedure or the dryer shows an Error Code (Refer
to page 22).
• During drying, water may collect between the window and the seal. This does not
affect the function of your dryer!
Note!
To Next Page
Loading...
