Parts Included with Product
Packed with the product are the following oven components and
accessories. When product is first unpacked, verify that all these
packaging materials carefully for missing items. If items cannot
be located, contact Midea customer service at āġĉććġćąćġąăăĂ
Materials Needed:
The gas utility connection and house structure at each home may be
different, so the specific parts required for connection to the house
are not included with the product. The parts identified below are or
may be required to complete the installation. For gas supply
connections, always use new supply line and adapters - never use an
old part for new range connections.
Surface Burners
and Caps (5)
Surface Burner
Grates (3)
Anti-Tip
Bracket Kit
Griddle
(some models)
Oven Probe Wire Rack Extension Rack
(some models)
Owner's
Manual
Gas Line
Shut-Off Valve
New Flexible
Gas Supply Line
3/4" or 1/2"
NPT x 1/2" ID
Gas-Approved
Teflon Tape or
Joint Compound
New Flare Union
Adapter 3/4" or
1/2" NPT x 1/2" ID
BEFORE STARTING INSTALLATION
New Flare Union
Adapter
1/2" NPT x 1/2" ID
Liquid Leak
Detector or Soapy
Water Solution
5/16" OD Sleeve
Anchor
(with 1/4" bolt) - 2 pcs
(for concrete floors only)
Optional Rear
Trim Kit
.*%*#č
Before using this product,
please read this manual carefully
and keep it for future reference.
The design and specifications
are subject to change without
prior notice for product
improvement. Consult with your
dealer or manufacturer for
details.
version A - 4 - 2020
www.midea.co
,QVWDOODWLRQ,QVWUXFWLRQV
Power
Circuit:
Frequency:
Capacity:
supply:
MODEL NUMBERS
(Pictures are for reference only and may not
accurately represent all models covered by this manual.)
6OLGH,Q*DV5DQJH
oven
en
12
IMPORTANT
SAFETY
INSTRUCTIONS
BEFORE
STARTING
INSTALLATION
INSTALLATION
PROCEDURE
CONFIRM
OPERATION
TROUBLESHOOTING
SAFETY
DEFINITIONS
components are present. If anything is missing, check the
or visit )% !ċ+)ĥ1/ĥ/1,,+.0 for assistance.
To Next Page
Loading...
