Midea MGS30S2AST

Cut Resistant Gloves,
Safety Glasses or
Goggles, and Steel
-Toed Shoes
(for your safety
and protection)
Drop Cloth or
Cardboard
(optional - to
protect floor)
Tape Measure
(to confirm
installation space)
Phillips Screwdriver
(to access
serviceable
covers)
Liquid Leak Detector
or Soapy Water
Solution (for gas
leak testing)
Pipe Wrench
(for gas
connections)
Open End or
Adjustable Wrench
(for gas connections
and gas conversion)
Nut Driver
(for gas
conversion and
anti-tip bracket
installation)
Pencil and Ruler
(for anti-tip bracket
installation)
Drill and 1/8"
Drill Bit (for
anti-tip bracket
installation)
Masonry Drill Bit
(for anti-tip
bracket installation
- concrete floors only)
Adjustable Groove
-Joint or Gooseneck
Pliers (for leveling
product)
Tools Needed:
To complete the installation, have the following tools readily available:
Level
(for leveling product)
Small Blade
Screwdriver (for
adjusting surface
burner simmer
setting)
120VAC Outlet
Tester (to check
electric supply
grounding)
13
IMPORTANT
SAFETY
INSTRUCTIONS
BEFORE
STARTING
INSTALLATION
INSTALLATION
PROCEDURE
CONFIRM
OPERATION
TROUBLESHOOTING
SAFETY
DEFINITIONS