Replace the light with a new one of the same type,
making sure that you connect the light with the
light cable correctly.
Reinstall the light back to the hood body.
LIGHTING
LIGHT REPLACEMENT
1.5W LED light.
Disconnect the connector of the light.
Switch off
the extractor hood and isolate the extractor hood by pulling out the
mains plug or switching off the fuse.
Remove the grease filter.
Remove the light by levering its fitting from the hood body(this may require
pressure or force to be applied).
B
DC 12 V
/
Self-ballasted
LED modules
To Next Page
Loading...
