M thermal Mono
22 202005
Midea M thermal Mono Engineering Data Book
5 Capacity Tables
5.1 Heating Capacity Tables (Test standard
:EN14511)
Table 2-5.1: MHC-V18W/D2RN8 heating capacity - peak values
1
Abbreviations:
LWT: Leaving water temperature (°C )
HC: Total heating capacity (W)
PI: Power input (W)
Notes:
1.Peak heating capacity values do not take account of capacity drops caused by frost accumulation and during defrosting.
Table 2-5.2: MHC-V18W/D2RN8 heating capacity - integrated values
1
Abbreviations:
LWT: Leaving water temperature (°C )
HC: Total heating capacity (W)
PI: Power input (W)
Notes:
1.Integrated heating capacity values take account of capacity drops caused by frost accumulation and during defrosting.