Maintenance and
Disassembly
Page 58
2. Fan disassembly
Note: Remove the panel plate and (refer to 1. Panel plate) before disassembling fan.
MOBA01-09HFN1-BT0W, MOB01-12HFN1-BT0W
Procedure Illustration
1) Remove the nut securing the fan
with a spanner (see CJ_ODU_
INV_001).
2) Remove the fan.
3) Remove the screws of the top cover.
(2 screws) (see CJ_ODU_INV_002).
4) Unfix the hooks and then open the
electronic control box cover (4 hooks)
(see CJ_ODU_INV_003).
CJ_ODU_INV_001
CJ_ODU_INV_002
CJ_ODU_INV_003
Note: This section is for reference only. Actual unit appearance may vary.
D-cut
Hook
To Next Page
Loading...
