DRYING A LOAD OF LAUNDRY
Press Power button to power your dryer on.
•
Place only one wash load in your dryer at a time.
Mixed loads of heavy and light weight fabrics will dry differently,which
may result in lightweight fabrics being dry while heavy fabrics remain
damp at the end of a drying cycle.
Add one or more similar items to your dryer when only one or two
articles of clothing need drying. This improves the tumbling action and
drying efficiency.
Overloading restricts tumbling action, resulting in uneven drying as
well as excessive wrinkling of some fabrics.
•
•
•
•
•
•
24
Step 1: Power on your dryer
Pressing Start/Pause button will start the selected cycle. To PAUSE
cycle, press Start/Pause button then open the door. To resume
operation after closing the door, always presses Start/Pause.
Opening the door during the operation will instantly stop operation and
will require pressing Start/Pause button to resume operation.
Step 4: Start your dryer
Step 2: Load your dryer
Select the appropriate cycle by Cycle Selector according to the cycle
chart on page 25.
Select the appropriate optional function by buttons according to the
chart on page 25.
My cycle
Once you have set the cycle selector and option function, you can push
and hold the “Dryness” button for 3 seconds to memory this setting as
your favorite cycle before start the unit.
The light beside the knob will flash with beeps to confirm the memory.
You can finish this Step by just select the “My cycle” once to use your
favorite.
•
•
•
•
Step 3: Select the appropriate cycle and options for the load
Requirements
Installation
Instructions
Dryer Use
Dryer Care
Troublesho
o
ting
Safety and
Precautions
Installation
To Next Page
Loading...
Need help?
General