EasyManuals Logo
Home>Midea>Dryer>MLE52S7AWW

Midea MLE52S7AWW User Manual

Midea MLE52S7AWW
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
40
Dryer
Safety
Operation
Requirements
Parts and
Features
Installation
Instructions
Dryer Use
Appendix
Dryer Care
Troubleshooting
DRYER CARE
CLEANING AND MAINTENANCE
CONTROL PANEL
Clean with a soft, damp cloth. Do not use abrasive substances.
Do not spray cleaners directly on the panel.
The control panel finish may be damaged by some laundry pre-
treatment soil and stain remover products. Apply such products away
from your dryer and wipe up any spills or overspray immediately.
STAINLESS STEEL OR ANODIZED DRUM
To clean the stainless steel or anodized drum, use a damp cloth with
a mild, non-abrasive cleaner suitable for stainless steel and anodized
surfaces.
Remove the cleaner residue and dry with a clean cloth.
DRYER EXTERIOR
Clean with a soft, damp cloth. Do not use abrasive substances.
Protect the surface from sharp objects.
Do not place any heavy or sharp objects or a detergent box on the
dryer. Keep them on the purchased pedestal or in a separate storage
box. This may scratch or damage the top cover of the dryer.
Since the entire dryer has a high-gloss finish, the surface can be
scratched or damaged.
Avoid scratching or damaging the surface when using the dryer.
DRYER EXHAUST SYSTEM
Should be inspected and cleaned yearly to maintain optimum
performance.
Disconnect the exhaust duct from the dryer and from the exhaust hood
(at the exhaust outlet) outside of the building.
Check the interior of the duct and remove any lint accumulation.
Be sure that lint is removed from the exhaust hood. Lint may collect in
the exhaust hood so that the flappers or louvers will not open or close
completely.
After cleaning the exhaust hood, check that the flapper or louvers
move freely.
Reassemble the exhaust duct and hood, checking that the joints are
secure and sealed.
Operate the dryer and verify that the exhaust air is not obstructed in
the vent and that there are no leaks in the system.
The outside exhaust hood should be cleaned more frequently to ensure
proper operation.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Midea MLE52S7AWW and is the answer not in the manual?

Midea MLE52S7AWW Specifications

General IconGeneral
BrandMidea
ModelMLE52S7AWW
CategoryDryer
LanguageEnglish

Related product manuals