42
Dryer
Safety
Operation
Requirements
Parts and
Features
Installation
Instructions
Dryer Use
Appendix
Dryer Care
Troubleshooting
Problem Solution
Clothes are
unevenly
dried.
•
Seams, pockets, and other similarly heavy areas may
not be completely dry when the rest of the load has
reached the selected dryness level. This is normal.
Select the Extra Dry setting if desired.
•
If one heavy item is dried with a lightweight load,
such as one towel with sheets, it is possible that the
heavy item will not be completely dry when the rest
of the load has reached the selected dryness level.
Sort heavy items from lightweight items for best
drying results.
Shuts off
before load is
dry.
•
Dryer load is too small. Add more items or a few
towels and restart the cycle.
•
Dryer load is too large. Remove some items and
restart the dryer.
The unit has a
special odor.
•
Household odors from painting, varnishing, strong
cleaners, etc. may enter the dryer with surrounding
room air. This is normal as the dryer draws the air
from surrounding air space of the dryer locations.
•
When these odors linger in the air, ventilate the room
completely before using the dryer.
Odors remain
in clothing
after refresh
•
Fabrics containing strong odors should be washed
utilizing desired wash cycle.
Garments
still wrinkled
after Wrinkle-
prevent
•
Small loads of 1 to 4 items work best.
•
Load fewer garments. Load similar-type garments.
Lint on
clothes
•
Clean lint filter before every cycle.
•
Some fabrics are lint producers (for example, a
fuzzy white cotton towel) and they should be dried
separately from clothes that are lint trappers (for
example, a pair of lack linen pants).
•
Divide larger loads into smaller loads for drying.
•
Check pockets thoroughly before washing and
drying clothes.
To Next Page
Loading...
Need help?
General