Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Care
TroubleshootingWasher Use
2. Insert the drain hose with the clamp onto the washer's drain pipe.
Make sure that the drain hose completely covers the end of the drain
pipe.
3. Move the clamp toward the drain pipe outlet. Tighten the clamp with
a flat blade screwdriver.
4. Fasten the drain hose to the washer frame at the indicated directions
with the hose clamps (2) provided, using a phillips screwdriver.
22
To Next Page
Loading...
Need help?
General