Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Care
TroubleshootingWasher Use
5. Insert the drain hose with the clamp onto the washer's drain pipe. Make
sure that the drain hose completely covers the end of the drain pipe.
Caution
Make sure that the connection between the drain hose and the wash
basin, standpipe or laundry tub is not airtight.
• 0ver the edge of wash basin - Secure the guide to the side of the
basin wall with a hook, tape it or tie it with a piece of cord to prevent
the drain hose from moving.
• In a standpipe - The standpipe must be no shorter than39 in. (99 cm)
and no longer than 96 in. (244 cm).
23
Hose
retainer
Tie strap
To Next Page
Loading...
Need help?
General