Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Care
TroubleshootingWasher Use
24
• In a laundry tub - The laundry tub must be no shorter than 39-in.
(99 cm) and no higher than 96-in (244 cm) maximum.
Level your washer
Caution
Do not use your washing machine without leveling. If your washer is
not level, it may:
• Vibrate excessively which can cause your washer to malfunction.
• Make excessive noise.
• Indicate error codes when the washer is running.
Extend the leveling feet only as much as is necessary. If the feet are
extended too much, your washer may vibrate.
Determine if the washer is level by checking the position of the tub or
by using a level.
1. Slide the washer into position.
2. Open the lid of the washer, then pour water into the tub to the
leveling circle. If the washer is level, the water will touch the leveling
circle all the way around. If the washer is not level, the water will only
touch part of the leveling circle.
Tie strap
Hose retainer
To Next Page
Loading...
Need help?
General