3
● Do not allow children to go near the oven when it is
operating, especially when the grill function is on.
● Ensure that the appliance is switched off before
replacing the oven lamp to avoid the possibility of
electric shock.
● An all-pole disconnection means must be
incorporated in the xed wiring in accordance with
the wiring rules.
● If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualied persons in order to avoid a hazard.
● Do not use harsh abrasive cleaners or sharp
metal scrapers to clean the oven door glass since
they can scratch the surface, which may result in
shattering of the glass.
● A steam cleaner is not to be used.
● The oven is not intended to be operated by means
of an external timer or separate remote-control
system.
● The oven must not be installed behind a decorative
door in order to avoid overheating.
To Next Page
Loading...
Need help?
General
