CAUTION: If you encounter any problems during the cooking process, always
switch off the cooker and allow it to cool before checking the steps below.
• Difficulty closing the lid or steam leaking from the lid.
Check that the rubber seal in the lid is clean and that it is installed correctly.
Check that the lid is correctly aligned before closing.
• Steam leaking from the red float valve.
Remove the lid. The valve may need cleaning. Remove it and clean it.
• Steam leaking from steam valve.
Check that the steam valve is closed.
• Lid will not open.
The cooker may be under pressure. Refer to page 13 to depressurise the cooker
before opening the lid.
• Code ‘C1’ displayed.
The cooking pan has no liquid content.
Power supply ............................................................ 220 - 240V~, 50/60Hz
Power consumption........................................................................... 1000W
Weight ..................................................................................................5.9kg
IMPORTANT: THIS APPLIANCE MUST BE EARTHED
TROUBLESHOOTING
SPECIFICATIONS
19
To Next Page
Loading...
Need help?
General
