MCAC-HTSM-201906 Midea R410A Direct Heating Type HPWH 50Hz Technical Manual
82
means the current setting is the minute of Timer 1 on, press the ▲ or ▼ to adjust, press key when
finished, the LCD will display as the following:
At this time the hour of the clock will flash, which means the current setting is the hour of Timer 1 off,
press the ▲ or ▼ to adjust, press key when finished, and then the minute of the clock will flash, which
means the current setting is the minute of Time 1 off, press the ▲ or ▼ to adjust, press key when
finished, the LCD will display as the following:
At this time the hour of the clock will flash, it means the current setting is the hour of the Timer 2 on. And
the follow setting method will be the same as the Timer 1. Similarly, the setting of Timing 3 is the same as
this method. After setting is finished, press OK key or wait for 7 seconds to confirm the setting, and the LCD
will display the effective timing information, as the following display:
Example of timing setting:
To Next Page
Loading...
