EasyManua.ls Logo

Midea ST 3.6F wi - Loading the Baskets; Basket Loading Guide

Midea ST 3.6F wi
152 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cloudiness on
glassware.
Combination of soft
water and too much
detergent.
Use less detergent if you have soft
water and select a shorter cycle to
wash the glassware and to get
them clean.
Problem Possible Causes What To Do
Black or grey
marks on dishes
Aluminium utensils
have rubbed against
dishes
Use a mild abrasive cleaner to
eliminate those marks.
The dishesare
not drying
Improper loading Use gloves if detergent residue can
be found on dishes to avoid skin
irritations.
Dishes are removed
too soon
Do not empty your dishwasher
immediately after washing. Open the
door slightly so that the steam can
escape. Begin unloading the dishwasher
only once the dishes are barely warm
to the touch. Empty the low basket
first. This prevents water form dropping
off dishes in the upper basket.
Detergent left in
dispenser cups
Dishes block detergent
dispenser cups
Re-loading the dishes properly.
Wrong program has
been selected.
In short programs the washing
temperature is lower. This also lowers
cleaning performance. Choose a
program with a long washing time.
Use of cutlery with a
low-quality coating.
Water drainage is more difficult with
these items. Cutlery or dishes of this
type are not suitable for washing in
the dishwasher.
WARNING
Self-repair or non-professional repair may cause serious risks to the safety
of the user of the appliance and impact warranty.
21

Related product manuals